Steam/Oil and Water Separator (CF11/CF41/UFS)
Product Description
Brief Introduction.
This type of steam separator use the sharp change of steam flow to separate the droplets from the steam,it is mainly used for supplying dry steam to steam facilities and protecting facilities from water hammer,besides of steam,the medium can also be compressed air and other gas,It has following advantages:
- Can adjust the air inflow automatically with the pressure change of medium,reduce vibration and noise.
- Pressure can rise with the temperature of steam,greatly reduce the power of pump motor,therefor realize the purpose of energy-saving.
- Heat efficiency can reach to 100%,save steam by at leat 20%.
- Easy maintenance and long service life.
Working Principle
The steam water separator is upgraded by combining baffle type, centrifugal type, swirl type, gravity type, baffle type, and filling type steam water separators. The steam water separator uses high-temperature nanofiltration for more efficient filtration and removal of liquid droplets carried by steam and compressed air systems. A large amount of water containing steam and compressed air enter the separator and move downwards in a neutral swirling centrifugal direction. Due to the different densities of gas and liquid, if both need to be filtered together, the liquid will usually be filtered onto the filter, And gas can pass through. And because of neutrality, the gas will still move in the original direction. The liquid left on the filter will be diverted to the bottom of the separator for condensation and discharge, thereby improving the gas quality and achieving a saturated gas effect of up to 99.9%
Application
Field of Application.
Product Name: CF11 type Steam Water Separator.
Pressure Rating: 1.6- 3.0 Mpa.
Nominal Diameter: DN15-25 mm.
Body Material: Steel WCB,Stainless Steel.
Standard screws: BSP,NPT.
Product Details
Material of Main Component.
| Name of component |
Material of component |
| Body |
WCB,Stainless Steel |
| Internal Parts |
Stainless Steel |
Main External Dimensions.
| DN |
L |
H1 |
H2 |
| 15-20 |
130 |
115 |
156 |
| 25 |
150 |
155 |
222 |
Product Parameters
Main Technical Parameters and Indexes of Performance.
| Highest separation efficiency(dry degrees) |
98% |
| Minimum Pressure Drop |
0.5 % |
| Max.Allowable Temperature |
350 |
| Pressure Range(Mpa) |
0.01-2.5 |
View of the factory
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}