| Customization: | Available |
|---|---|
| Media: | Wog |
| Temperature: | High Temperature |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.This series of valves is used for the boilers' periodic and continuous sewerage system in thermal power plants; the power station's water delivery system and water discharge system.
2.The main seal uses the same material to ensure the same coefficient of thermal expansion, to ensure the seal and prevent bite; the main seals are hardened, high hardness, wear resistance, erosion resistance, long service life.
3. The back pressure of the throttling device achieves the purpose of pressure regulation by adjusting the number of throttling cylinders and the orifice of the throttling orifice in the throttling cylinder.
4. The high temperature resistant spring provides continuous sealing thrust between the valve disc and the valve seat and is maintained sealed by the line pressure.
5. Pneumatic + manual drive, safe and reliable, once the automatic control fails, the valve can be actuated by manual drive.
Body material: Integral forging A105, Integral forging F304, Integral forging F11, F22, P91 and other special materials
Connection type: Welding
Nominal diameter: 2"-18"
Applicable medium: water, oil, steam - carbon steel + chromium molybdenum steel;
Nitric acid, acetic acid, etc. - stainless steel;
Propane, ethylene, etc. - cryogenic steels;
Working temperature: Carbon steel -29 °C ~ 425 °C;
Stainless steel -40 °C ~ 550 °C;
Low temperature steel -46°C~350°C,
Chrome-molybdenum steel -29 °C ~ 550 °C.
Structure: Self-sealing
Drive mode: Electric, pneumatic, hydraulic, gear, etc.
Applicable industries: Petroleum, chemical, firepower, pharmaceutical, fertilizer, power plant and other industries
High pressure differential water shutoff valve.
| Specification | Design Standard |
Face to Face Length | Pressure and Temperature Range | Test & Inspection |
| JB/T3595-2002, E101,DL/T531 |
E101\JB/T3595-2002,GB/T12221-2005 | E101\JB/T3595-2002 | JB/T3595-2002 |
Main Parts and Materials.
| No | Part Name | Material |
| 1 | Body | WCB,WC6,WC9,20CrMoV,15CrlMolV, F11, F22, P91 |
| 2 | Seat | A105,12CrlMoV |
| 3 | Wedge | WCB,WC6,WC9,20CrMoV,15CrlMolV |
| 4 | Stem | 2Crl3,25Cr2MolV |
| 5 | Bonnet | A105,WCB,WC6,20CrMoV,12Cr1Mo1V |
| 6 | Sealing Ring | Graphite , Soft steel |
| 7 | Separate Ring | 1Crl3,12Cr1MoV |
| 8 | Bolt | 35,35CrMoA |
| 9 | Nut | 45,35CrMoA |
| 10 | Packing | Graphite |
| 11 | Yoke | WCB,WC6,20CrMoV |
| 12 | Actuator | Assembly |
| DN(mm) |
L(mm) |
WELDED ENDS CONNECTION | ||
| 200(P54100V) | 250(P54140V) | 320(P54170V) | ||
| DN80 | 470 | 108*8 | 108*11 | 108*14 |
| DN100 | 560 | 133*10 | 133*14 | 133*16 |
| DN125 | 600 | 168*12 | 168*16 | 168*22 |
| DN150 | 650 | 194*14 | 194*20 | 194*25 |
| DN175 | 700 | 219*16 | 219*22 | 219*28 |
| DN200 | 711 | 245*18 | 245*25 | 245*32 |
| DN225 | 800 | 273*20 | 273*28 | 273*35 |
| DN250 | 864 | 325*25 | 325*32 | 325*42 |
| PN(Mpa) | Test Pressure(Mpa) | Working Temperature | Applicable Medium | |
| Shell | Seal | |||
| 10.0 | 15.0 | 11.0 | ≤425 ºC | Water,Steam,Oil.,etc |
| 16.0 | 24.0 | 17.6 | ||
| 20.0 | 30.0 | 22.0 | ||
| 25.0 | 37.5 | 27.5 | ||
| 32.0 | 48.0 | 36.0 | ||
){kind=link}