| Customization: | Available |
|---|---|
| Certification: | ISO |
| Pressure: | Ordinary Pressure |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Brief Introduction
401/501 inverted bucket type superheated steam trap is a unique inverted bucket type trap with a water collection tank. The water collection bin stores sufficient condensed water to ensure that the water seal can be maintained throughout the entire discharge cycle. The small cup in the water collection bin can float up and down at the inlet of the steam pipe. When the condensate rises, it seals the steam inlet pipe.
Working Principle
When the condensed water enters the drain valve to form a water seal, it enters the upper bucket of the drain valve from both sides to open the valve core due to its own weight, and the condensed water is discharged. When steam enters, due to a water seal, the bucket rises and closes the drain valve under the upward thrust of the steam. When a portion of the steam condenses, a portion of the steam escapes through the exhaust port. The weight of the bucket pulls the valve core and opens the drain valve. Cycle and start again.
Specification
1. This valve is specifically designed to overcome various unfavorable factors such as overheating, high pressure, and small loads;
2. The valve hole is located at the top of the valve, and dirt will not accumulate on the valve hole;
3. Can withstand high back pressure, up to 90%;
4. The unique lever mechanism fully amplifies the force provided by the bucket and can open the valve under system pressure;
5. The inverted bucket drain valve does not require special adjustment, and condensed water will not accumulate and cause water hammer.
Application
Suitable for steam main pipelines, heat tracing pipelines, steam heating equipment, and other systems that require efficient drainage, such as boiler cylinders, steam water separators, heat tracing pipelines, flash tanks, heat sinks, coils, and other heaters and heat exchanger process equipment.
Features.
1,Simple structure.No gemel structure,no fixed abrasive ,excellent abilities to save energy.Valve baseis made of crome steel,with long service life.
2.The waste are discharged constantly will be washed away,no dirty remained ,and the air will be automatically discharged.
3.There are many kinds of throttle holes.Under different pressure,It can always realiys realize largest amount discharged.
4.The parts are all fixed on the valve cover facilitate maintence.
| Product model | 401-SH/501-SH |
| Body material | Chromium molybdenum steel |
| Applicable medium | Steam |
| Nominal diameter | DN15-25mm |
| Connection method | Flange, welding |
| Executive standards | National and American standards |
Our Services
Pre-sale service:
1.We have full stock and can deliver within short time.
2.OEM and ODM order are accepted, Any kind of logo printing or design are available.
3.Good Quality + Factory Price + Quick Response + Reliable Service, is what we are trying best to offer you.
4.All of our products are produced by our professional workman and we have our high-work-effect foreign trade team, you can totally believe our service.
After you choose:
1. We will count cheapest shipping cost and make invoice to you at once.
2. Check quality again, then send out to you at 1-2 working day after your payment
3. Email you the tracking no., and help to chase the parcels until it arrive you.
After-sale service:
1.We are very glad that customers give us some suggestion for price and products.
2.If you have any question,please contact us freely by E-mail or Telephone.
){kind=link}