| Customization: | Available |
|---|---|
| Pressure: | Pn10, Pn16 |
| Size: | Dn100-Dn250 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Installation, Use & Maintenance:
1. Before Installation, it's necessary to clean the valve and remove possible defects caused in the transportation process.
2.Check carefully whether marks and the nameplate on the valve meet operating requirements.
3. This valve can be insstalled on pipelines at any angle.
4. This valve shall be fully open or fully closed in running and not be used as a throttle valve, or else its sealing surfaces will be washed and get worn faster.
5. For Long term storage, it shall be stored in a dry and ventilated room whth periodic check to avoid rust.
6. Knocking shall be avoided in the transportation process.
Specification
1. Design and Manufacture: GB/T 12224
2. Face to Face Dimension: Manufacturer's standard
3. Flange Dimension: JB/T 79.1, ANSI B16.5 DIN 2543, JIS B2020
4. Inspection and Test: GB/T 9092
5. Material Standard: GB/T 12229 for Carbon Steel, GB/T 12230 for Stainless Steel
Materials for Main Parts
Sr No. |
Parts | Material | Sr No. | Parts | Material |
| 1 | Main Body | 20# | 7 | Seat Ring | PPL |
| 2 | Side Body | 20# | 8 | Disc | WCB |
| 3 | Blanking Bucket | 20# | 9 | Bonnet | 20# |
| 4 | Screw | B7 | 10 | Stud | B7 |
| 5 | Spring | 17-4PH | 11 | Nut | 2H |
| 6 | Seat | WCB | 12 | Pneumatic Actuator |
){kind=link}