H64y Hydraulic Pressure Test Bonnet Swing Check Valve

• Customization: Available
• Media: Wog
• Temperature: High Temperature
• Model NO.: GAH64Y
• Connection Form: Welding
• Structure: Piston
• Pressure: High Pressure
• Function: Non Return
• Sealing Form: Self Tight Pressure Sealing
• Flow Direction: Unidirection
• Standard: ANSI
• Application: Industrial Usage, Water Industrial Usage
• Transport Package: Plywood Case
• Trademark: GOOLE, OEM, ODM
• Origin: China(Mainland)
• HS Code: 8481804090
• Production Capacity: 10000PCS/Year

Product Description

H64Y Hydraulic Pressure Test Bonnet Swing Check Valve

Product Description

H64Y Hydraulic Pressure Test Bonnet Swing Check Valve
Valve brand: GOOLE
Valve Model: SD61Y
Pressure environment: 2.5-32.0MPa P55 100V P57 100V high temperature and high pressure
Product material: carbon steel (WCB, A105), chromium molybdenum steel (WC6, WC9, F22, F91) and other special materials
Connection form: Welding
Nominal diameter: 50~1000mm
Adapt to medium: water, steam, etc.

Application

H64Y Hydraulic Pressure Test Bonnet Swing Check Valve is used as:

It is installed on 300MW and 600MW boiler superheater outlets, reheater inlets, and outlet steam pipes as isolation devices for hydrostatic testing. In the non-drive mode, after the water pressure is removed, the internal blockage plate is removed and the guide sleeve is installed. It can be used as a pipe, and the blockage plate can be installed again at the next water pressure.

Product Features

H64Y Hydraulic Pressure Test Bonnet Swing Check ValveStructural Features

1, the valve pressure level is equal to or higher than the design pressure and design temperature selection.
2. Valves are designed, selected, manufactured, inspected and accepted according to relevant standards such as E101, ANSIB16.25JB/T6903, JB/T6440, JB/T6902, JB/T6439, and JB/T3595.
3, the valve has no gear.
4. Two types of pressure self-tightening seal structure and bolted valve cover structure are adopted, and the two ends of the pipe are welded.
5, using a flat O-ring seal, valve seat made of stainless steel surfacing.
6. For the use of non-transmission method, plug the plate into the hydrostatic test, and remove the plate after the hydrostatic test.
7. The blocking plate seal can be adjusted by adjusting the adjustment screw on the upper end of the support to achieve the purpose of sealing.

Installation Instructions

H64Y Hydraulic Pressure Test Bonnet Swing Check Valve Installation Instructions

1. The installation of the valve must be installed in the direction of the injection arrow of the valve body. For the use of non-transmitting rotating device, remove the blocking plate after the hydrostatic test. The O-ring seal should be properly stored.
2, water pressure test water temperature is 20-70 °C.
3, when the valve and pipe are welded on the opposite side, the inlet and outlet of the valve body and the caliber of the connecting pipe should be consistent. If the valve interface piping material is incompatible, weld transitions are required.
Hydraulic pressure test valve (SD61Y) valve performance parameters:

Product Details

 Main external dimension and connection dimension 

 

Type specs	Dimension (mm)
22″ SY61X-600Lb	L	d	D	H
28″ SY61X-900Lb	1295	500	586	655
22″ SY61X-3000LbC9	1753	608	762	1012
22″ SY364Y-600Lb	1499	330	580	970
34″ SY364Y-600Lb	1295	500	584	700
22″ SY61X	1753	778	882	1044
22″ SY364Y-900Lb	1455	476	570	910
28″ SY364Y-900Lb	1753	608	762	1007
350 SY61Y-64	900	325	410	555
400 SY61H-40	950	385	465	570
450 SY61Y-P5450V	1100	450	560	695
500 SY61Y-P5464V	1100	460	570	705
550 SY61Y-P3564	1100	515	570	734
950 SY61YP5550V	1850	930	1120	1340
1000 SY61Y-100	1850	995	1135	1310

Product Parameters

Type	PN	Shell testing pressure(MPa)	Seal testing pressure(MPa)
SY61X-600Lb  SY364Y-600Lb	600Lb	15.0	11.0
SY61X-900LbC9 SY364Y-900LbC9	900Lb	22.5	16.5
SY61X-3000LbC9	3000Lb	47.5	34.7
SY61Y-64	6.0	9.6	7.1
SY61Y-100	10.0	15.0	11
SY61Y-P54/50V	P54/50V	15.0	6.3
SY61Y-P54/64V	P54/64V	15	8.0
SY61Y-P35/64	P35/64	15	8
SY61YP54/50V	P55/50V	17.25	6.5

View of the factory